bmw multi? tool latest software v3.0
powerful than ak300!!!
歡迎咨詢，電話tel：15889503376，qq：744236518
bmw multi tool includes forth parts, hardware device, dongle,programmer, software. before running software you must connectdongle and hardware device to computer.
new software update:v3.0, here is updatetips:
1.the software v3.0 must be run above firmware v1.0.4.
2.you can go to help->device update->device update to updateyour device to the newest version.
3.once you update your firmware when use v2.5 software. it does notneed update the firmware again.
4.add italian and spanish language.
5.normal bug fix.
description:
1. obd ii connector: connects the tool to the vehicle's data linkconnector (dlc).
2. dongle: usb dongle.
3. usb connector: connects the tool to the pc/laptop through usbcable.
4. programmer: program keys.
5. programmer female pin: connects programmer to device.
6. programmer male pin: connects programmer to device.
specifications:
1. operating temperature: -20 to 70 °c ( -4 to 158 °f )
2. storage temperature: -40 to 85 °c ( -40 to 185 °f )
3. diagnostic interface: 16 pin
4. usb interface: usb 2.0
5. power: dc 5 v - 12 v
6. consumption: 1 w
7. dimensions: length 95 mm, width 49 mm, height 28 mm
function:
bmw multi tool supported function including:
1. car access sytem dentification
2. read/write cas eeprom(obdii)
3. read/write km stored in cas system(obdii)
4. read/write synchronization codes stored in cassystem(obdii)
5. synchronize dme and cas(obdii)
6. synchronize cas and elv(obdii)
7. prepare dealer key for cas1/cas2/cas3/cas+(support latest cas3verison)(obdii)
8. read/restore cas key information(obdii)
9. disable/enable key with working key(obdii)
10. clear dtc and shadow (obdii)
11. prepare dealer key with cas eeprom dump
12. unlock dealer key prepared with our software with cas eepromdump or key information
13. change km in cas and instrument dashboard with file dump
14. have key programmer, you can programm dealer keydirectly.
pay attention to the function: help->device update. youcan get the latest software version and firmware verion when youcan access to internet.
1. menu:
- tool: you can choose language here, support english andchinese simplified restart software to apply your settings.
- file make key: you can prepare dealer key with ews and cas eepromdump.
- help: device update. you can get your device and dongle idversion and update it.
2. protocal type:
now bmt support there type of protocol: kwp-can bus 100kbps,kwp-can bus 500kbps, kwp-2000. auto detect? function canhelp you to choose the right protocol. after choose protocol okay,then press connect. if connected success. all cas info willdisplay in cas identification. include cas number, vin, productiondate, etc.
3. eeprom function:
read eeprom, write eeprom, save file, load file…
1). you should backup the cas eeprom before prepare dealer key.after succeed read eeprom, please save it as back file. this stepis very important.
2). now can't read the whole eeprom for cas3 system. but the mainsection is contained. it should be saved. when you read cas eeprom,it will give tips (press ok to continue).
4. odometer:
support read and change km stored in cas system.
don't support to change km in instrument. if you want to change thekm display in instrument. you should change km in cas system first.then modify the km in instrument manually.
5. synchronization codes:
1). cas3 code-dme, cas3code-egs: read and write dme and egs codestored in cas3 system.
2). synchronize dme and cas— this function will be useful whileprepare dealer key or any other operation which cause can't startthe engine.
3). synchronize cas and elv — this function can help clear wheelerrors
6. key learn
function introduction:
1). get key info: with this function you can get the key cutting,remote frequency, and key data.
2). save key info: save the read key info.
3). load key info: load the saved key info. to see the key data andprepare for write key info.
4). write key info: write the loaded key info into cassystem.
5). make dealer key: you can prepare dealer key after you get keyinfo successfully. also you should choose the key position.
6). add key: add the new dealer key into cas system. some cassystem needs this step to start the engine.
7). enable key: insert the current key into ignition switch, pressenable key. the key after current key will be enabled.
8). disable key: insert the current key into ignition switch, pressdisable key. the key after current key will be disabled.
9). clear dtc: before prepare dealer key and after it you can usethis function to clear dtc.
10). clear shadow: before prepare dealer key and after it you canuse this function to clear shadow.
7. file make key
1). choose cas or ews type.
2). load the choose eeprom file you will get the make dealer keywindow.
3). choose key position and press make dealer key button. flowthe given tips to prepare dealer key. after succeed you can savethe new eeprom dump file.
- for ews1, ews2, ews3, ews4, cas1, cas2, cas3 type the prepareddealer key can start the engine directly.
- for some ca3+ type you need to write back the new dump file intocar.
4). cas3 encrypt data, only obdii prepare make key is support forcas3 encrypt data.

---

深圳市順瑞達電子科技有限公司
嚴生
15889503376
深圳布吉丹竹頭地鐵站 英郡年華

---

供應0.25級數字壓力表
滄州廠家供應無縫雙絲頭DN80 材質20# 鍍鋅 噴砂
德式鉗工錘
（PBT巴斯夫）德國代理商
供應臺灣TTO骨架油封
供應BMW Multi Tool OBD2 CAS1-3
供應增壓管硅膠管，渦輪增壓管
珠海大容量登山包 印刷logo 登山包品牌大全
貴州旋轉扣件報價鵬元愿與您攜手同行
常德斷橋鋁門窗設備什么牌子好（多少錢）
襄陽市幸福暖通暖氣片燃氣壁掛爐
江蘇萬基(在線咨詢),振動流化床,振動流化床工作原理
長沙別墅哪家好
浙江德馬格攤鋪機DF145CS提升油缸性能經久不衰
廠家直供寶塔紙管
托輥、鍍鋅滾筒、小滾筒
天津和平sat基礎培訓英蘭讓您自信流利說英語
無線導覽 無線導覽 無線導覽無線導游系統
湖北荊門聚氨酯直埋式預制保溫管技術要求
供應醇基燃料新助劑，第二代添加劑